VIS Motorsport
EA839 2.9/3.0 Upgrade Internal Kit & Cadillac ATS-V or CTS V Sport's
OEM HPFP Maximum 200 bar
VIS HPFP Tested Reliably Over 250 Bar
Crucial Upgrade for All Stage 2 Cars and not only
Increased Fuel Flow Rates = More Reliability
Bolt-On Installation Perfect for DIY (No need for special tools/equipment)
Up to 37% Flow Increase Over the Factory High-Pressure Fuel Pump
Increased Piston Diameter: 11.67mm vs. Stock 10.00mm
Raises the Factory Fueling Limits Present in 2.9T and 3.0T Engines
Increased Flow to Meet the Demands of E85 Optimized Tunes and Turbo Upgrades
Required for Most Stage 1+, 2+, and Stage 3 Performance Software
Fuel Pump Internals Precision-Machined to Aerospace Tolerances
DLC Coated Piston and Cylinder for Reduced Friction and Increased Performance
Matched Piston and Cylinder for Absolute Precision
Relatively Easy Installation
VIS Balance Shaft Delete (BSD)
The bearings we use have 10.000 hours warranty with no grease service and 100.000 working hours ,submerged in oil at 100 degree celsius and 8000rpm!(bearing rated at 50k rpm)
Bearing maintenance involves regular inspection, cleaning, lubrication, and proper handling to ensure optimal performance and prevent premature failure.
Key aspects include visual checks for damage, monitoring temperature and vibration, and addressing lubrication needs.
Inspection:
Visual Inspection: Check for signs of wear, damage, or contamination like rust, cracks, or excessive play. Temperature Monitoring: Track bearing temperature to identify potential overheating issues. Vibration Analysis: Use vibration analysis tools to detect abnormal vibrations indicative of bearing problems. Lubrication Check: Assess lubricant condition and replenish or replace as needed.
WE RECCOMEND CHECKING THE BEARING EACH 2 YEARS AND REPLACE IF NEED WITH A NEW BEARING SKF 6300ZZ
Bearing maintenance involves regular inspection, cleaning, lubrication, and proper handling to ensure optimal performance and prevent premature failure.
Key aspects include visual checks for damage, monitoring temperature and vibration, and addressing lubrication needs.
Inspection:
Visual Inspection: Check for signs of wear, damage, or contamination like rust, cracks, or excessive play. Temperature Monitoring: Track bearing temperature to identify potential overheating issues. Vibration Analysis: Use vibration analysis tools to detect abnormal vibrations indicative of bearing problems. Lubrication Check: Assess lubricant condition and replenish or replace as needed.
WE RECCOMEND CHECKING THE BEARING EACH 2 YEARS AND REPLACE IF NEED WITH A NEW BEARING SKF 6300ZZ
VIS EA824 4.0TFSI Upgrade Internal Kits
- clearence at top of piston 0.001-0.00015
- deviation of circularity max 0.001mm
- 370-450hb before rectification
- nitrided at depth of 0.15-0.25
- hardness of hv10-760-860 kgf/mm2 after nitriding
- 34mocr11 STAS 791-1988 special aged steel
- deviation of circularity max 0.001mm
- 370-450hb before rectification
- nitrided at depth of 0.15-0.25
- hardness of hv10-760-860 kgf/mm2 after nitriding
- 34mocr11 STAS 791-1988 special aged steel
VIS EA888 GEN2 STAGE 1
clearence at top of piston 0.001-0.00015
- deviation of circularity max 0.001mm
- 370-450hb before rectification
- nitrided at depth of 0.15-0.25
- hardness of hv10-760-860 kgf/mm2 after nitriding
- 34mocr11 STAS 791-1988 special aged steel
- deviation of circularity max 0.001mm
- 370-450hb before rectification
- nitrided at depth of 0.15-0.25
- hardness of hv10-760-860 kgf/mm2 after nitriding
- 34mocr11 STAS 791-1988 special aged steel
VIS EA888 GEN3 HPFP
clearence at top of piston 0.001-0.00015
- deviation of circularity max 0.001mm
- 370-450hb before rectification
- nitrided at depth of 0.15-0.25
- hardness of hv10-760-860 kgf/mm2 after nitriding
- 34mocr11 STAS 791-1988 special aged steel
- deviation of circularity max 0.001mm
- 370-450hb before rectification
- nitrided at depth of 0.15-0.25
- hardness of hv10-760-860 kgf/mm2 after nitriding
- 34mocr11 STAS 791-1988 special aged steel
VIS HPFP for EA113 and Mazda 323/626 MPS
- clearence at top of piston 0.001-0.00015
- deviation of circularity max 0.001mm
- 370-450hb before rectification
- nitrided at depth of 0.15-0.25
- hardness of hv10-760-860 kgf/mm2 after nitriding
- 34mocr11 STAS 791-1988 special aged steel
- deviation of circularity max 0.001mm
- 370-450hb before rectification
- nitrided at depth of 0.15-0.25
- hardness of hv10-760-860 kgf/mm2 after nitriding
- 34mocr11 STAS 791-1988 special aged steel
