High Pressure Fuel Pumps
Autotech High Volume Fuel Pump Upgrade Kit early 2.0T FSI + MAZDASPEED 3 6
Manufacturer: Autotech
Part: Fuel pumps
Partno.: AT-FSI-HPFP
Autotech High Volume Fuel Pump Internal Kit MK7 Gen 3 TSI TFSI
Order Number: 10.127.103K
VIS HPFP for EA113 and Mazda 323/626 MPS
- clearence at top of piston 0.001-0.00015
- deviation of circularity max 0.001mm
- 370-450hb before rectification
- nitrided at depth of 0.15-0.25
- hardness of hv10-760-860 kgf/mm2 after nitriding
- 34mocr11 STAS 791-1988 special aged steel
- deviation of circularity max 0.001mm
- 370-450hb before rectification
- nitrided at depth of 0.15-0.25
- hardness of hv10-760-860 kgf/mm2 after nitriding
- 34mocr11 STAS 791-1988 special aged steel
EA839 2.9/3.0 Upgrade Internal Kit & Cadillac ATS-V or CTS V Sport's
OEM HPFP Maximum 200 bar
VIS HPFP Tested Reliably Over 250 Bar
Crucial Upgrade for All Stage 2 Cars and not only
Increased Fuel Flow Rates = More Reliability
Bolt-On Installation Perfect for DIY (No need for special tools/equipment)
Up to 37% Flow Increase Over the Factory High-Pressure Fuel Pump
Increased Piston Diameter: 11.67mm vs. Stock 10.00mm
Raises the Factory Fueling Limits Present in 2.9T and 3.0T Engines
Increased Flow to Meet the Demands of E85 Optimized Tunes and Turbo Upgrades
Required for Most Stage 1+, 2+, and Stage 3 Performance Software
Fuel Pump Internals Precision-Machined to Aerospace Tolerances
DLC Coated Piston and Cylinder for Reduced Friction and Increased Performance
Matched Piston and Cylinder for Absolute Precision
Relatively Easy Installation
VIS EA888 GEN2 STAGE 1
clearence at top of piston 0.001-0.00015
- deviation of circularity max 0.001mm
- 370-450hb before rectification
- nitrided at depth of 0.15-0.25
- hardness of hv10-760-860 kgf/mm2 after nitriding
- 34mocr11 STAS 791-1988 special aged steel
- deviation of circularity max 0.001mm
- 370-450hb before rectification
- nitrided at depth of 0.15-0.25
- hardness of hv10-760-860 kgf/mm2 after nitriding
- 34mocr11 STAS 791-1988 special aged steel
VIS EA888 GEN3 HPFP
clearence at top of piston 0.001-0.00015
- deviation of circularity max 0.001mm
- 370-450hb before rectification
- nitrided at depth of 0.15-0.25
- hardness of hv10-760-860 kgf/mm2 after nitriding
- 34mocr11 STAS 791-1988 special aged steel
- deviation of circularity max 0.001mm
- 370-450hb before rectification
- nitrided at depth of 0.15-0.25
- hardness of hv10-760-860 kgf/mm2 after nitriding
- 34mocr11 STAS 791-1988 special aged steel
Roller tappet conversion Kit für HPFP of the 2.0 TFSi EA113
The bulletproof solution for the tappet failure
VIS EA824 4.0TFSI Upgrade Internal Kits
- clearence at top of piston 0.001-0.00015
- deviation of circularity max 0.001mm
- 370-450hb before rectification
- nitrided at depth of 0.15-0.25
- hardness of hv10-760-860 kgf/mm2 after nitriding
- 34mocr11 STAS 791-1988 special aged steel
- deviation of circularity max 0.001mm
- 370-450hb before rectification
- nitrided at depth of 0.15-0.25
- hardness of hv10-760-860 kgf/mm2 after nitriding
- 34mocr11 STAS 791-1988 special aged steel
Autotech Dual High Volume Fuel Pump Upgrade Kit 2015+ Audi R8 4S V10 & Lambo Huracan V10 5.2L
Order Number: 10.127.101K
